~ DPRO RDA ~
The Coil Art DPRO RDA is a 24mm atomizer with a creative post-less deck and length extended airflow system.
There are four terminals at the base of the deck for coil leads that utilize side mounted hex screws and the 24K gold plating allows for greater conductivity.
Airflow enters the DPRO RDA via two side air holes that measure 4.5mm in diameter and are adjustable. The airflow then travels down a length extended airflow system that is angled towards the coils for perfect airflow capability inside the RDA.
Included with the DPRO RDA is an 8mm bore 810 ULTEM drip tip with a tighter draw than other 810 drip tips, allowing for enhanced flavor intake and a bottom feed pin that converts the DPRO RDA into a bottom feeding atomizer.
Utilizing a post-less, yet straightforward build deck, a smaller bore drip tip and airflow holes, the Coil Art DPRO RDA is the perfect RDA for those looking for a more flavor based RDA!
DPRO RDA Specifications:
- 24mm Diameter
- Creative Postless Deck
- Four Terminals At Base of Deck
- 2.5mm Each Terminal
- Side Mounted Hex Screws
- 3mm Deep Juice Well
- Double O-Ring Secured
- 24K Gold Plated Deck
- PEEK Insulator
- Length Extended Airflow System
- Dual Adjustable Side Airflow
- Airflow Angled Towards Coils
- 4.5 Diameter Each Air Hole
- Single Airflow Capable
- 8mm Bore 810 ULTEM Drip Tip
- Bottom Feed Pin
- 24K Gold Plated 510 Connection
Included in this Purchase:
- One Coil Art DPRO RDA
- Extra O-Ring and Screw Pack
- One Bottom Feed Pin
- One Pair Prebuilt Clapton Coils
- One 810 ULTEM Drip Tip
- Coil Art Sticker
- Hex Key
~ Please see related products below for replacement coil heads & accessories ~
This item is sold as "FINAL SALE", no refunds, returns, or exchanges permitted.
Advanced User Item. Use at Your Own Risk!
Warning Before Purchase:
Rebuildable atomizers have known risks. They are intended for use only by ADVANCED users who have, and know how to use, a multimeter and who have a basic knowledge of electronics. Rebuildable atomizers cannot safely be used by inexperienced users and users who do not have the equipment necessary to test the coils they build. Rebuildable atomizers should only be used with IMR batteries. Please note the following:
- Rebuildable coils/wicks must be tested with a meter before use. Failure to do so can cause injury to you and damage to your property.
- If not built properly, coil/wick assemblies WILL destroy electronic devices and should always be tested first on a mechanical mod.
- By purchasing this product, you certify that you meet all of the requirements above and that you hold harmless Roadside Vapes for any improper use of this product.
Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by Eliminator Vapes and any and all of Eliminator Vapes parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. Eliminator Vapes and any and all of Eliminator Vapes parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). Eliminator Vapes and any and all of Eliminator Vapes parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
Eliminator Vapes will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.